SPEC SN26MT2C - SPEC Carbon Twin Clutch Kit Nissan Skyline R32 RB25 RB26 pull-type; 1989-1994.
Manufacturer Part Number: SN26MT2C
SPEC Carbon Twin Clutch Kit Nissan Skyline R32 RB25 RB26 pull-type, SPEC Carbon Twin Clutch Kit
Nissan Skyline R33 RB26 GTR Pull Type
New from LMPerformance! SPEC's Full Carbon on Carbon Twin and Tripple Disk Racing Kits are the pinnacle of clutch technology. SPEC's Carbon Kits feature an extremely light 3 lb stackup, common drive hub, but drives almost as smooth as a stock clutch. Due to their aggressive and chemical nature these kits are not recommended for daily use in cold climates (will wear a bit faster in cold).
Carbon Twins and Tripples will need to be shimmed every 10 or 15K miles.
- Carbon Twin Kit TQ Capacity (ft lbs): 1100
- Carbon Twin Weight (lbs): 24
Includes Everything Needed for Install: Clutch, Flywheel, Standard or Hydraulic Bearing, etc.
SPEC Carbon Twin Clutch Kit Nissan Skyline R32 RB25 RB26 pull-type, SPEC Carbon Twin Clutch Kit
Nissan Skyline R33 RB26 GTR Pull Type
IMAGES: Images may be a representation and may not reflect the actual product.
SPEC SN26MT2C - CARBON TWIN CLUTCH KIT NISSAN SKYLINE R32 RB25 RB26 PULL-TYPE
LIMITED WARRANTY: S.P.E.C., Inc warrants all products to be free of defects in materials and workmanship for normal use and service up to 120 days after retail purchase. SPEC reserves the right to examine any part returned for warranty claim to determine whether a defect in materials or workmanship exists in such product. SPEC liability is limited to repairing, replacing or crediting towards other product, and credits will not exceed the invoice total for the parts. Labor and storage charges are not products of SPEC and, therefore, will not be reimbursed for any reason. Final determination of the condition and suitability of the parts for uses contemplated by the buyer is a sole responsibility of the buyer. SPEC will not be liable for any damage or injury to persons or property that might be claimed as a result of improper installation or misuse of any part subject to this warranty. Return shipping to SPEC will not be pre-paid or paid for. Customer is responsible for return shipping for inspection. There are no warranties expressed or implied beyond those set forth above.
INSTALL NOTES: Unless using a new flywheel provided by SPEC, existing unit must be resurfaced prior to installation of the clutch product to ensure integrity of friction surface. Owner must also break in the new high performance clutch for a minimum of 450 miles, primarily city and/or stop-and-go driving, before full throttle engagement, drag launching or speed shifting. * FAILURE TO EXECUTE EACH OF THE ABOVE WILL HINDER CLUTCH PERFORMANCE AND VOID ALL WARRANTY!!! Unless otherwise instructed by written notice from SPEC, follow manufacturer’s instructions when installing clutch and flywheel products. SPEC recommends that all bolts be inspected before re-installation, and any bolts that have been removed and re-torqued multiple times replaced. SPEC will not warrant any component failure due to install error.